Your location: Home > Products

RA-EL-0608-F10U Hydraulic Return Oil Filter Element

RA-EL-0608-F10U is a domestic replacement hydraulic return filter element for Korean SHC. Its overall dimensions and mounting interfaces are fully benchmarked against the original part. It is used in industrial hydraulic return lines to remove solid contaminants such as metal wear debris, dust, oxidized gum and sludge from hydraulic oil. It protects precision hydraulic components including hydraulic pumps, control valves and hydraulic cylinders, reducing the risks of valve seizure and pump wear. Suitable for continuous heavy-load and dusty working conditions, it can directly replace the original Korean SHC filter element without modifying the filter housing.

RA-EL-0608-F10U is a domestic replacement hydraulic return filter element for Korean SHC. Its overall dimensions and mounting interfaces are fully benchmarked against the original part. It is used in industrial hydraulic return lines to remove solid contaminants such as metal wear debris, dust, oxidized gum and sludge from hydraulic oil. It protects precision hydraulic components including hydraulic pumps, control valves and hydraulic cylinders, reducing the risks of valve seizure and pump wear. Suitable for continuous heavy-load and dusty working conditions, it can directly replace the original Korean SHC filter element without modifying the filter housing.


800_800模板__2026-10-14+16_16_12.jpg

800_800模板__2026-10-14+16_17_22.jpg

Product Advantages

  1. Multi-layer gradient glass fiber composite filter media with depth filtration and high dirt-holding capacity. It features a stable β ratio, and its filtration performance decays slowly during long continuous operation.

  2. Integrated 304 stainless steel perforated protective sleeve plus inner and outer support screens. It boasts high structural strength, good resistance to differential pressure and hydraulic shock, and resists collapse and damage under equipment vibration.

  3. Equipped with NBR nitrile rubber seals, resistant to swelling in hydraulic oil and adaptable to fluctuating oil temperatures. The end-face sealing is tight to effectively prevent oil bypass leakage.

  4. Dimensions fully replicate the original Korean SHC specifications for direct interchangeable installation. No filter modification is required, making assembly, disassembly and maintenance simple.

  5. Compatible with differential pressure indicators for on-line monitoring of filter clogging status and early warning, facilitating planned maintenance and cutting down unplanned equipment shutdown.

Technical Parameters

  • Filtration Rating: 10μm

  • Filter Media: Composite glass fiber media + 304 stainless steel inner & outer support screens, perforated protective sleeve

  • Seal Material: NBR Nitrile Rubber

  • Compatible Fluids: Mineral anti-wear hydraulic oil, lubricating oil

  • Nominal Pressure: 1.6MPa for return line service; Max. allowable differential pressure of filter element: 1.0MPa

  • Compliance Standard: ISO16889

Application Scope

Suitable for return oil filtration of hydraulic stations in cement plants, mines, metallurgy and construction machinery. Widely matched with heavy-duty hydraulic systems of mills, stacker-reclaimers, conveying equipment, etc. It is applicable to industrial sites with heavy dust, frequent equipment start-stop cycles and vibration shock. It purifies return oil and protects precision hydraulic components such as oil pumps, valve blocks and actuator cylinders.


INQUIRY

Scan the qr codeClose
the qr code