The Φ300×400 pleated sintered felt filter element adopts 304 stainless steel sintered felt as filter media with a pleated structure, and the fluid flows from the inside out during filtration. The metal sintered felt is sintered at high temperature to form a uniformly porous filtration layer, which traps fine solid particulate contaminants in the fluid. Featuring reusability after cleaning, high temperature resistance and corrosion resistance, it is used for precision fluid purification in chemical, water treatment, hydraulic, oil & gas and other working conditions. The all-stainless-steel construction suits high-pressure, high-temperature and corrosive media applications.
The Φ300×400 pleated sintered felt filter element adopts 304 stainless steel sintered felt as filter media with a pleated structure, and the fluid flows from the inside out during filtration. The metal sintered felt is sintered at high temperature to form a uniformly porous filtration layer, which traps fine solid particulate contaminants in the fluid. Featuring reusability after cleaning, high temperature resistance and corrosion resistance, it is used for precision fluid purification in chemical, water treatment, hydraulic, oil & gas and other working conditions. The all-stainless-steel construction suits high-pressure, high-temperature and corrosive media applications.


Pleated structure made of 304 stainless steel sintered felt provides large filtration area, high dirt-holding capacity and low flow resistance.
The metal filter media is high-temperature resistant and anti-oxidative. It can be repeatedly cleaned and regenerated for reuse, delivering a long service life and lower replacement costs.
Uniform and stable pore structure for 5μm precision filtration. Consistent filtration rating, free from accuracy deviation caused by pressure shock.
Integrated all-metal support core and filter media, corrosion resistant. Suitable for acidic, alkaline and high-temperature fluid environments; no media shedding to contaminate the fluid.
Pleated bonding molding process ensures reliable sealing. With inside-out filtration design, contaminants are trapped on the inner side of the element for easy flushing and cleaning.
High overall structural strength and good resistance to pressure shock. Resistant to deformation and damage under pulse and alternating pressure conditions.
Filtration Rating: 5μm
Filter Media: 304 stainless steel sintered felt, pleated structure
Seal Material: FKM Fluoroelastomer / NBR Nitrile Rubber optional
Compatible Fluids: Water, oil products, solvents, weakly corrosive fluids, gas, etc.
Nominal Pressure: ≤2.5MPa; Max. allowable differential pressure of filter element: 1.0MPa
Compliance Standard: GB/T 30555, Standard for Metal Sintered Filter Elements
Widely used in chemical, petroleum, water treatment, food & pharmaceutical, hydraulic lubrication, gas dust removal and other industries. It performs precision filtration for liquids and gases to remove fine solid particles. Especially ideal for conditions requiring repeated cleaning and regeneration of filter elements, high temperature and mild corrosion. It is widely assembled into filter housings for fluid purification with inside-out flow direction.
Contact: LEO
Phone: +86 18603736970
Tel: +86 15617189062
Email: xy@xyfilters.com
Add: A11, 1st Floor, Chuangye Building, No.1 Park, High tech Zone, Xinxiang City, Henan Province